How to Sew a Christmas Tree Skirt – Free Pattern & Video Tutorial

How to Sew a Christmas Tree Skirt – Free Pattern & Video Tutorial

How to Sew a Reversible Christmas Tree Skirt – Free Pattern & Video Tutorial

DIY Christmas Tree Skirt

This is a Christmas Tree Skirt you’ll love to sew – no large curves or hooking a pencil to a string and hoping the circle lays flat. With this 8 sided design you only have straight cuts and a clean look. Works well for both whimsical and sophisticated fabrics.

I use two prints and images from the quilt panel from my Gnome for Christmas flannel collection manufactured and sold by Riley Blake Designs. It will of course work with any fabrics but I’m going for a “Christmas Gnome” theme this year!


Christmas Tree Skirt Supplies


  • IRON
  • ROTARY CUTTER & MAT (suggested)
  • ThermoWeb Heat ‘N Bond® Lite (if you do applique)


2 sec – Supplies Used
6 secs – STEP 1: Cut & Prep Fabrics
51 secs – STEP 2: Cut Fabric Segments
6:09 – STEP 3: Sew the 8 front segments together
6:46 – STEP 4: Creating the reverse side
7:09 – using a 54″ fabric for the reverse instead of 44″
7:57 – STEP 5: Adding Applique (optional)
15:32 – STEP 6: Sew the two sides together
16:42 – STEP 7: Turn, clip, press and topstitch
20:36 – STEP 8: Adding Kam Snaps for closures


Easy Christmas Tree Skirt Tutorial

Here is a run-down of how to sew this Christmas Skirt. I love that it is all straight cuts!

Links are affiliate links so I will make a small commission if you click and buy (but it won’t cost you anything extra!).  This helps me create more free content and tutorials so thank you in advance!

First you will cut the 2 1/2 yard fabric for the front into four 21″ lengths per the diagram below. Keep the fabric folded for the next step.

STEP 1: Cut the Main Fabric


Christmas Tree Skirt - main cuts

STEP 2: Cut the Tree Skirt Segments

After doing my basic cuts I then ironed my four fabric pieces, ironing the fold as well – we will cut it off so it doesn’t matter.

Cut the fabric to 20″ (top and bottom if you are using a directional fabric) x 20 1/2″ high.

Next follow the diagram to cut eight pieces that are 3″ wide at the top and 20″ wide at the bottom.


Christmas Tree Skirt - Cut Shapes

STEP 3: Sew the Tree Skirt segments together

With right sides together, sew the 8 segments together with a 1/2″ seam allowance, leaving the last seam open so you can sew the front and back together.


Christmas Tree Skirt - sew and press seams
making the reverse side of the Christmas Tree Skirt

STEP 4: Decide on your Reverse Side Fabric

Since I wanted to use my flannel that comes 44″ wide, I used the same 8 segment process used for the front to create the back.

If you want a plain back or have a 54″ fabric you’d like to use, you will need 1 1/2 yards. You then lay the skirt pieces you just sewed together on top of the ironed 54″ square and use it as a template to cut the backing.


54 in backing fabric
Adding applique gnomes to the Christmas Tree Skirt

STEP 5: Add the Applique (if desired)

I used ThermoWeb Heat ‘N Bond Lite to apply gnomes I cut out of the Gnome for Christmas Quilt Panel – placing one gnome per section of the tree skirt. 

I chose to do a loose free motion quilting stitch around each gnome applique to make the project go a little faster.

I used a ruler to position each gnome about 1 1/2″ up from the bottom edge of the fabric and centered them on each section.


Tree Skirt - ironing applique
Pinning the Christmas Tree Skirt together

STEP 6: Layer both Sides Together and Sew

With right sides together and seams lined up (if you did both sides in 8 segments) – pin all the way around the tree skirt.

I added quilting pins on seams and within the skirt for added protection against shifting as I moved the fabric around the sewing machine.

Sew around the entire tree skirt with a 1/2″ seam allowance, leaving a section over on an end for turning.

NOTE: If you choose to add ribbons to tie your tree skirt instead of Kam® Snaps like I’ll show you later, add them now on the ends. (details not included – I’m all about the snaps for this project!)


finishing the Christmas Tree Skirt

STEP 7: Trim, Turn, Press & Topstitch

You are almost done!

Clip and trim the points and pivots to get rid of excess fabric that would prevent the angles from being crisp and flat. (More details are in the video around the 17 min mark)

Turn your Christmas tree skirt right side out and carefully  press around all the edges.

Press the area left open to turn the tree skirt in 1/2″ so it is consistent with the rest of the edge.

Topstitch 1/4″ from the edge, all the way around the skirt.


DIY Christmas Tree Skirt

STEP 8: Add Snaps

I debated about what I wanted to use to close the back of my tree skirt – if anything to be honest.

There are lots of options: velcro, buttons, ribbon ties and more.  I decided that Kam® Snaps were exactly what I wanted to use.

They are plastic snaps that come in a variety of colors. The white would look good on both sides of my tree skirt (it’s reversible, remember? 😁) They would blend in with the white beards on the gnome side and look like more snowflakes on the red side.

They are easy to use and have great directions – you can find details directions at the 20 minute 36 second mark in the video.

That’s it – you are done!

Now you have a versatile and reversible Christmas Tree Skirt to use for years to come.

If you make one and share it on social media be sure to tag me!

I’m active on Instagram and Facebook so tag me so I don’t miss it!

Be sure to follow me on InstagramFacebookPinterest, subscribe to my YouTube channel.

Happy Sewing and wishing you a very Merry Christmas!

🎅🏻 🎄 Tara Reed 



Quick & Easy Cord Keeper Tutorial

Quick & Easy Cord Keeper Tutorial

Say goodbye to tangled cords and your fabric scrap stash by making these quick and easy wraps!


Whenever I travel I get so frustrated when I can’t find my headset, my charger cords or when I find them and they are like a tangled puzzle.

I often put my cords in plastic bags which helps – but I’m also trying to cut down on my use of plastic bags when possible.

Cue the fabric cord keeper!

This simple solution is fast and much prettier than a cord in a plastic bag.  Ready to see just how easy it is to make?


2 Pieces of Fabric – 3″ x 4.75″ (cut longer than 4.75″ for larger or thicker cords)

Fusible Batting – 3″ x 4.75″ (I used Pellon 971F)

Snaps or Velcro:

I used Kam Snaps in the example because I thought the snaps looked cuter than a square sewn over velcro.



Step 1:

CUT two pieces of fabric and one piece of fusible batting to 3″ x 4.75″

FUSE batting to one piece of fabric.

Step 2:

SEW around the edges of the fabric, right sides together, with a 1/4″ seam, leaving an opening on one side to turn right side out.

Step 3:

TRIM the corners and TURN right side out. Gently push the corners to be as squared as possible. 


Step 4:

TOPSTITCH all the way around the fabric about 1/8″ from the edge.

Step 5:

ADD SNAPS per snap directions.  Be sure to test that when you look the cord keeper the snap goes together (and that the two flat parts don’t meet) before permanently attaching the second half of the snap. (Guess how I know to do that… whoops!)

Just like that YOU ARE DONE.

They make quick and easy gifts for teachers, co-workers, family and friends.  Add a zipper bag to hold the cords and plugs and everyone will want to be on your gift-giving list!

What plans do you have for this project?  Leave a comment and let me know!

Have a happy & creative day!

– Tara Reed

P.S. If you make this pattern I’d love to see it and hear how you used it!

Tag me on Instagram: @artisttarareed
Share it on Pinterest:

P.P.S. Want to see more FREE patterns and projects using the Homestead Life Placemat Panel and fabrics? CLICK HERE >